EXO Remote Play

PlayStation Remote Play lets the EXO connect to your PS5 over the network instead of a USB cable. It works, but it adds delay, so use a wired connection whenever you can.

Warning Remote Play adds delay compared with a USB connection. The app marks it "Not recommended". Use the P5General connection for the best response.

What you need

  • A PS5 with Remote Play turned on.
  • Your PlayStation account.
  • The EXO connected to your network (Wi-Fi or Ethernet).

Setup

Connection Method panel on PS5 Remote Play: (A) the Remote Play section, (B) "Not recommended - works, but adds delay".
Connection Method panel on PS5 Remote Play: (A) the Remote Play section, (B) "Not recommended - works, but adds delay".
  1. In the app, open your config's Device page and open Connection Method.
  2. Pick Remote Play. It is the last row.
  3. Sign in at Sony when asked.
  4. Paste the address of the page you land on after signing in back into the app.
  5. Enter your account ID.
  6. On the PS5, go to Settings > System > Remote Play > Link Device. The PS5 shows an 8-digit code.
  7. Type the 8-digit code into the app.

Success check

  • The app accepts the 8-digit code and finishes setup.
  • Your PS5 responds to your controller.

Problems? See Troubleshooting.

PreviousEXO Gaming on PCNextEXO App Tour